New YorkRebate Program
ConEd (Electric) - Commercial and Industrial Energy Efficiency Program
You getLighting Varies widely by type Performance-Based Incentive: $14 - $125/unit up to 50% of project cost HVAC Unitary HVAC and Split Air systems: $75/ton Packaged Terminal AC/HP: $150 per ton Single-Packaged Vertical AC/HP: $0.30/kWh saved Variable Refrigerant Flow AC/HP: $0.30/kWh saved Others Chillers: $0.30/kWh saved Air Compressors: $250/HP Window Film: $1/sq. ft. Pre-Rinse Spray valve: $15/unit Faucet Aerator: $2/unit Variable Frequency Drives: $0.19/kWh saved Refrigeration Door Gasket: $0.19/kWh Night Cover: $0.19/kWh Anti-Condensation Heater Controls: $25/door Evaporator Fan Controls: $0.19/kWh Custom Custom kWh Savings: $0.35/kWh
Apply on official siteView on DSIRE
Quick facts
- Incentive type
- Rebate Program
- Amount
- Lighting Varies widely by type Performance-Based Incentive: $14 - $125/unit up to 50% of project cost HVAC Unitary HVAC and Split Air systems: $75/ton Packaged Terminal AC/HP: $150 per ton Single-Packaged Vertical AC/HP: $0.30/kWh saved Variable Refrigerant Flow AC/HP: $0.30/kWh saved Others Chillers: $0.30/kWh saved Air Compressors: $250/HP Window Film: $1/sq. ft. Pre-Rinse Spray valve: $15/unit Faucet Aerator: $2/unit Variable Frequency Drives: $0.19/kWh saved Refrigeration Door Gasket: $0.19/kWh Night Cover: $0.19/kWh Anti-Condensation Heater Controls: $25/door Evaporator Fan Controls: $0.19/kWh Custom Custom kWh Savings: $0.35/kWh
- Applies to
- Utility
Dates
- Start date
- 2023-01-01
- Expiration
- 2025-11-03
- Source last updated
- November 26, 2024
About this incentive
Note: All projects must be completed (all documents received, and project is ready for post inspection) by November 3, 2025, to be guaranteed for 2025 incentive rates. See the program Manual for full listing of incentives Con Edison offers New York Commercial electric customers a rebate program for energy efficient equipment in buildings inside the eligible service area. All equipment must be installed by a participating contractor and installations may be inspected before incentive payments. Customers can schedule an energy efficiency survey to begin the program. The Commercial and Industrial Equipment Rebate and Custom Efficiency Programs offer incentives to directly metered electric customers in good standing. Additionally, small businesses are eligible for direct-install incentives through Con Edison. This offering is separate from the standard commercial and industrial offerings and is only available to commercial customers with a monthly peak demand of 100-300kW.
Data updated . Always confirm details on the official program website before applying. Programs change frequently.